Programmable controller IC698PSA350E 24V DC power module
Brand GE color Standard Application Industrial height 369mm rated current 515mA
Protection Level IP45 Suitable for motor power 152KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number IC698PSA350E
Applicable pipe 2 Whether imported is weighing 4.33 kg can be sold nationwide
Programmable controller IC698PSA350E 24V DC power module
The IC698PSA350 is part of the PACSystem RX7i platform, currently operated by Emerson Automation and previously manufactured by GE Intelligence Platforms (GE IP). This electricity
The source is installed on the RX7 backplane. It has an input voltage range of 85 to 264 VAC, 47 to 63 H and 100-150 VDC, with a large input power of 440 watts (typical value) and 500 watts (large value). it
The maximum output power is 350 watts with a total of three (3) outputs, e.g. 5 VDC, 12 VDC, and -12 VDC, with output currents of 0-60 amps, 0-12 amps, and 0-4 amps, respectively
The C698PSA350 is a high-capacity power module for the PACSystem RX7i controller family. The module is used to deliver the backplane power supply, which is used by the module to activate the internal circuit and can be operated.
This power module occupies a single slot in the chassis and is designed to be installed only in slot 0 of the RX7i rack.
The IC698PSA350 has input power voltages from 85 to 264 VAC,100-150 VDC, and AC input frequencies from 47 to 63 H. The module is rated for 120/240 VAC and 125
VDC, input power requirements are 440 watts (typical value) and 500 watts (large value). When used for AC input power, the power factor of this power module is 0.99.
The C698PSA350 is a single-slot power module that is installed in the left slot or slot 0 of the RX7 rack. It is equipped with various LED status indicators to help identify the module’s operating status
State. These indicators include Field 0K(field normal) and OUTPUT OK(output normal)OVER TEMP leds. Built-in protection circuits (such as overheat and overvoltage protection) are provided
The power module and airflow protection. The 70 CFM forced air cooling fan is located under the system chassis and provides cooling air to the power module. If a stop in airflow is detected, an LED indicator is displayed OVER TEM
Will start.
The IC698PSA350 power supply is available in A Series and B Series versions, with the A Series power supply having 0.25 “x 1.25” fuses installed internally, while the B Series power supply has 5 x 20 m fuses. Installation insurance
The wire is an 8A/250V fuse.
The 1C698PSA350 power module is part of the RX7i series, manufactured by GE Fanuc, and is capable of sending logic level signals to the module through the backplane. It has a rated output power of 350
Watt. Rated operating voltages are 120/240 volts AC and 125 volts DC, the power module operates at frequencies between 47 and 63 Hz, and the module’s operating temperature is typically between 0 and 60 de. Equipped with source Dao block
Airflow sensors for easy detection of fan faults stop airflow around the drive. In either case, the overheated LED will light up. Passing can be enabled or disabled using jumpers outside the module
sensillum
Programmable controller IC698PSA350E 24V DC power module
GE IC697ACC720
GE IC697ALG230
GE IC697ALG440
GE IC697BEM711
GE IC697BEM713
GE IC697CHS790
GE IC697CPM925
GE IC697CPX935
GE IC697HSC700
GE IC697MDL241
GE IC697MDL250
GE IC697MDL350
GE IC697MDL652
GE IC697MDL671
GE IC697MDL740
GE IC697PWR711
GE IC697PWR720
GE KBGA2
GE KBGB2
GE MULTILIN MTM
GE MULTILIN MTM-120(S-A20-120VA)
MERLIN GERIN MX+0F 26948
