The TRICONEX 0903-164-7921 has built-in protection that automatically shuts down power generation

The TRICONEX 0903-164-7921 has built-in protection that automatically shuts down power generation

The TRICONEX 0903-164-7921 has built-in protection that automatically shuts down power generation

The brand TRICONEX color standard applies industrial height 228mm rated current 496mA
Protection level IP45 Suitable for motor power 107KW Application Site Power Industry Material Code GJR2391500R1220 Power industry HIEE401782R0001 Part No. 0903-164-7921
Applicable pipe 2 Whether imported is weighing 4.31 kg can be sold nationwide

The TRICONEX 0903-164-7921 has built-in protection that automatically shuts down power generation

The brand TRICONEX color standard applies industrial height 228mm rated current 496mA
Protection level IP45 Suitable for motor power 107KW Application Site Power Industry Material Code GJR2391500R1220 Power industry HIEE401782R0001 Part No. 0903-164-7921
Applicable pipe 2 Whether imported is weighing 4.31 kg can be sold nationwide

The TRICONEX 0903-164-7921 has built-in protection that automatically shuts down power generation

TRICONEX 0903-164-7921 Invensys’ built-in protection automatically shuts down power generation

According to the above formula, the engine speed of a bipolar generator producing a 60 Hz output frequency is 3,600 rpm. For the same generator configuration, to change the output frequency to 50 Hz, the engine speed would need to be reduced to 3,000 rpm. Similarly, for a 4-pole generator, an engine speed of 1,800 rpm produces an output of 60 Hz. Reducing engine speed to 1,500 RPM produces an output of 50 Hz.

In the case of small or home generators, you can change the engine speed setting by making a few changes on the control panel of your device. Follow these steps to change the generator frequency from 60 Hz to 50 Hz:

Run the generator and set the frequency meter on the control panel to 50 Hertz

Check the AC voltmeter or potentiometer as appropriate and read the generator’s voltage output. The output voltage decreases as the frequency decreases and may be lower than expected

Adjust the AC voltmeter or potentiometer on the control panel until the desired 50 Hz output voltage is obtained

By making a similar modification on the control panel, you can increase the frequency from 50 Hz to 60 Hz

If the control panel does not display the frequency, you need to first connect a device that measures the frequency while the generator is running, and then change the engine speed.
The generator controller unit monitors and controls your unit in real time. In the event of too high engine speed or very low output frequency, the built-in protection function automatically shuts down power generation

The TRICONEX 0903-164-7921 has built-in protection that automatically shuts down power generation

TRICONEX 0903-164-7921
TRICONEX 9031647921
TRICONEX 0905-148-6921
TRICONEX 0923-141-6957
TRICONEX 1600071-001
TRICONEX 2000417
TRICONEX 2000418
TRICONEX 20064-320
TRICONEX 2058
TRICONEX 2101
TRICONEX 2290614
TRICONEX 2301
TRICONEX 2351
TRICONEX 2381
TRICONEX 2401
TRICONEX 2402
TRICONEX 2481
TRICONEX 2551
TRICONEX 2658
TRICONEX 2841
TRICONEX 3002
TRICONEX 3003
TRICONEX 3005
TRICONEX 3006
TRICONEX 3008
TRICONEX 3008N

Scroll to Top