The discrete input module IC693MDL646 supports positive or negative logical connection configuration
Brand ABB color Standard Application Industrial height 425mm rated current 501mA
Protection level IP45 Suitable for motor power 36KW Application Site Power Industry Material Code GJR2391500R1220 Power industry HIEE401782R0001 Part Number IC693MDL646
Applicable pipe 2 Whether imported is weighing 2.88 kg can be sold nationwide
The discrete input module IC693MDL646 supports positive or negative logical connection configuration
IC695CMM002/004 is a Serial communication module provided by GE. It provides Serial I/O,
There are five protocols: Modbus Master/Slave, CCM Slave, DNP3 Master/Slave, and SPL.
Each communication port supports 64 communication tasks;
Each communication port has 224 modules and communication status bits, and can use I, M, and T zones;
Each communication port has 128 modules and communication control bits, can use Q, M, T zone;
Each communication task can have continuous read, position control continuous read, position control single read; Continuous write, bit control connection
Continuous write, bit-controlled single write; Do not wait 7 ways.
For highly reliable and standardized communication objects, the continuous or bit-controlled continuous mode can be generally adopted.
For the communication objects with low reliability and poor standardization, it is reasonable to adopt the single bit control method.
For example, there is a temperature control instrument, using continuous reading mode, because the read and write cycle is too short, resulting in the instrument
A communication jam occurred. Using the large-cycle bit-controlled single read mode, the blockage disappears.
Control bits can be controlled in the following ways:
1, after a task is completed, time is up, start the next communication task. Time here is different in principle. This method is the most flexible, but it is a lot of procedures.
2. At the same time, set different communication task control bits =1 at different times. The advantage of this method is that the logic is simple, the disadvantage is that the task may be lost when encountering a timeout, and the amount of programs is not small.
3, bit timing left (right) movement, small program amount, simple. The disadvantage is that you may lose tasks when encountering timeouts. In fact, when there are more tasks (>30), the continuous method is not much different from the first method above. It’s a matter of accounting.
The sent and received packets are generally counted in bytes. Each byte contains a start bit and a stop bit (usually 10 bits).
If the stop bit is two bits, each byte is 11 bits, plus a check bit, a maximum of 12 bits.
The length of the standard Modbus read data sending message is 8 bytes, and the length of the reply message depends on the length of the read data
How much change. The general rule is 5+N, then the total number of bytes sent and received is 13+N, the minimum value =14.
Minimum number of digits =14×10=140 digits, or =14×12=168 digits.
The discrete input module IC693MDL646 supports positive or negative logical connection configuration
GE ESM10A
GE IS200TSVCH2ADC MRP061873
GE IS200TSVCH2AED MRP246517
GE IS200SPROH1AAB MRP663860
GE IS210BPPBH2CAA
GE RS-FS-9001
GE SR489-P5-HI-A20-E
GE VMIACC-5595-208 350-805595-208J
GE GESSBS-6AH256
KOLLMORGEN AKM33E-ANCNR-00
GE IC698RMX016-ED
GE IC698CRE030-DE
GE IC687BEM731-AB
GE IC698CHS009A
GE IC698PSD300C
GE IC698PSA350E
GE RXE2N0Q0J132A
GE IC695CPU320
GE 369-HI-R-M-F-E-H-E
GE DS3820PSCB1C1B
GE 04240FD11234A
GE IC695CPU320-CF
GE VMIVME-5565-110000
GE IC693TCM302
GE 04220FL11232A
GE IC752SPL013-BA EX2100
GE V7668A-1310B0 350-9310007668-131020 D
GE PMC422-LAM D2
GE V7668A-131000 350-9310007668-131000 B
GE V7668A-1310B0 350-9310007668-131020 B
GE H201Ti122
GE VMIVME-3122
GE VMIVME-2540
GE VME-PMC-CADDY
GE VMER-64
GE EVPBDP0001 EVPBDP032
GE EVMECNTM13
GE 9T58K2812
GE XVR19 6U-VME-SBC
Kollmorgen 63025-01D
GE IS220PSCAH1A 336A4940CSP9
GE IS220PDIAH1BE 336A5026ADP4
GE IS220PRTDH1A 336A4940CSP6
GE IS420UCSBH4A
