IC693MDR390 90-30 series Programmable Logic controller (PLC) platform module
Brand ABB Color Standard Application Industrial height 411mm rated current 590mA
Protection level IP45 Suitable for motor power 107KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number IC693MDR390
Applicable pipe 2 Whether imported is weighing 5.68 kg can be sold nationwide
IC693MDR390 90-30 series Programmable Logic controller (PLC) platform module
The IC693MDR390 is a 90-30 series Programmable logic controller (PLC) platform component module that can be used as a combination of discrete input and output modules. The module has eight (8) discrete input channels and is designed to accept an input signal voltage range of -30 to +30 VDC with a rated or nominal voltage of 24 VDC compared to a typical input current of 7.5 mA at rated voltage. It also has eight (8) normally open (N.O.) Discrete output channels in the form of relay contacts are designed for voltages ranging from 5 to 30 VDC, 5-250 VAC, and 50/60 Hz frequencies, with each output contact capable of delivering a maximum load current of 2 amps and a maximum current of 4 amps. The IC693MDR390 is a single-slot module that fits into any I/O slot on the 90-30 series substrate. It can be used with any central processing unit (CPU) module, such as embedded and modular cpus. It can be installed on a local I/O board where the CPU is installed, or on an extended or remote I/O board. The IC693MDR390 input channel has an on-state voltage of 15-32 VDC and an on-state current of 4 mA, while the Off state voltage range is 0-5 VDC and an off state current of 1.5 mA. For on and off signal conversion, the typical response time of the input channel is 7 ms. In contrast, for both signal conversions, the typical response time of the output channel is 15 ms. The backplane current consumption of the module is 80 mA when all IO is active, and 70 mA when all outputs are powered.
The GE Fanuc IC693MDR390 I/O module is a solid-state I/O module designed specifically for the GE Fanuc series 90-30 PLC product line. The input/output module has 8 DC inputs and 8 normally open relay output circuits. It is a simple to use 8-way trigger device that accepts discrete inputs from manual switches, buttons, limit switches and photocells. Each input corresponds to a relay output circuit that can be used to control user-defined loads such as motor starters, alarm indicators, and solenoid valves. The GE Fanuc IC693MDR390 8 DC input and 8 relay output modules must be powered by a 24 volt DC rated supply, which can operate properly in the rated supply voltage range of -30 to +32 volts DC.
The GE Fanuc IC693MDR390 8 DC input and 8 relay output modules provide a low-cost solution to control up to 8 separate relay circuits by using DC signals. The output operating voltage can operate in two ranges :5 to 30 volts DC or 5 to 250 volts AC at a frequency of 50 to 60 Hz. The module’s 8 relay outputs are divided into 2 sets of 4 outputs each, and each set can be powered from a different power supply using a different voltage range if needed. The GE Fanuc IC693MDR390 8 DC input and 8 relay output modules have a high isolation voltage of 1500 volts RMS between input and output, and a lower value of 500 volts RMS between the output groups. Response times on and off are up to 15 milliseconds. Each circuit has a status LED that indicates when the relay is on (normally) or off (energized).
IC693MDR390 90-30 series Programmable Logic controller (PLC) platform module
GE IS200TVIBH2BBB
GE IS200WETBH1ABA
GE IS210AEBIH3BEC
GE IS215UCVEH2AE
GE IS215UCVEM01A IS215UCVEH2AF VMIVME+7614-133 350-017614-133 E
GE IS215UCVEM09A VMIVME-017614-132 VMIVME-7698
GE IS220PAICH1A 336A4940CSP3
GE IS220PDOAH1A
GE IS220PRTDH1BC 336A5026ADP13
GE IS230SNRTH2A
GE IS420ESWBH2A
GE IS420ESWBH3A
GE MIFIIPI55E10HI00
GE RS-FS-9001 362A1052P001
GE SR469-P5-HI-A20
GE SR469-P5-HI-A20-E
GE SR750-P5-G1-S1-HI-A20-R
GE SR750-P5-G5-S5-HI-A20-R-T
GE SR750-P5-G5-S5-LO-A20-R-T
GE UR6AH
GE UR6AV
GE UR8AH
GE V7768-320000 350-9301007768-320000 A0
GE VME-7807RC VME-7807RC-410000 350-930078074-410000 G
GE VMIVME-2128
GE VMIVME-4140
GE VMIVME-7455
GE VMIVME-7750 VMIVME-7750-760000 350-027750-760000 N
GE VMIVME-7750 VMIVME-7750-834 350-027750-834 D
