DS200TCQAG1BHF analog input/output board DCS gas turbine control

DS200TCQAG1BHF analog input/output board DCS gas turbine control

DS200TCQAG1BHF analog input/output board DCS gas turbine control

Brand ABB color standard application Industrial height 267mm rated current 367mA
Protection level IP45 ADAPTS to motor power 106KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number DS200TCQAG1BHF
Applicable pipe 2 Whether imported is weighing 4.88 kg can be sold nationwide

DS200TCQAG1BHF analog input/output board DCS gas turbine control

Brand ABB color standard application Industrial height 267mm rated current 367mA
Protection level IP45 ADAPTS to motor power 106KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number DS200TCQAG1BHF
Applicable pipe 2 Whether imported is weighing 4.88 kg can be sold nationwide

DS200TCQAG1BHF analog input/output board DCS gas turbine control

DS200TCQAG1BHF analog input/output board DCS gas turbine control
The GE RST analog I/O board DS200TCQAG1BHF contains four 34-pin connectors, two 40-pin connectors, and six jumpers. The board also has six leds. The GE RST analog I/O board DS200TCQAG1BHF is designed with 6 holes for mounting the board in the board cabinet of the inverter. These holes are aligned with the matching holes on the plate frame, and you can secure the plate using washers and screws. When removing the old board, place the washers and screws together for installing the replacement board. Because of the high voltage in the board, do not allow any metal parts to fall into the board cabinet. If a screw or washer falls into the cabinet, locate the part and remove it from the drive. If the drive starts with the loose metal still inside, the metal could damage the drive or start a fire or cause a severe electric shock.

Some guidelines can help prevent metal screws and washers from falling into the drive. When removing a board, hold the screwdriver with one hand, guide the screwdriver to the screw with the other hand, and then hold the screw when removing the board. To install the screw, align the screw with the hole with one hand and turn the screwdriver with the other. Never tighten the screws too tightly, or the board may crack or break. Instead, simply tighten the screws in place. Washers help protect the board from damage caused by over-tightening.

DS200TCQAG1BHF analog input/output board DCS gas turbine control

GE IS210AEDBH4AGD
GE IS210AEPSG1AFC
GE IS210SAMBH2AA
GE IS210WSVOH1AE
GE IS215ACLEH1A
GE IS215ACLEH1AB
GE IS215ACLEH1BB
GE IS215UCVEH2AB
GE IS215UCVEH2AF
GE IS215UCVFH2BB VMIVME-7650-83H 350-007650-83H C
GE IS215UCVGM06A IS215UCVGH1A VMIVME-7666-111000
GE IS220PAICH1A
GE IS220PAOCH1A
GE IS220PDIAH1B
GE IS220PDIIH1B 336A5026ADP1
GE IS220PPDAH1B
GE IS220PPRFH1A
GE IS220PPRFH1B
GE IS220PPROS1B
GE IS220PRTDH1A
GE IS220PSVOH1B
GE IS220YDIAS1A
GE IS230SNCIH6A
GE IS230SNIDH1A MRP689579
GE IS230SRTDH2A
GE IS230STAOH2A
GE IS230TBAIH2C
GE IS230TCISH6C
GE IS230TDBTH6A
GE IS230TNCIH4C
GE IS230TNPAH2A
GE IS230TNSVH3A
GE IS230TVBAH2A
GE MIVII1000E00HI00
GE MMI301
GE MS90376-12Y
GE PCH1026
GE S710D-EST2
GE S739DVT
GE SD-108542
GE SD-98762

Scroll to Top