IS410TRLYS1B Mark VIeS relay output and coil induction module

IS410TRLYS1B Mark VIeS relay output and coil induction module

IS410TRLYS1B Mark VIeS relay output and coil induction module

Item	IS410TRLYS1B
Product Name	Mark VIeS Relay Output with Coil Sensing
Life-cycle Status	Active
I/O Pack Redundancy	Simplex or TMR
I/O Pack	IS420YDOAS1B (qty 3 or 1) (order separately)
Number of Channels	12 Form-C relays (12DO)
Contact Ratings	• 0.6 A at 125 V dc • 1.2 A at 48 V dc • 8 A at 24 V dc • 3 A at 120 / 240 V ac
I/O ContactWetting & Fusing Configuration	Contacts 1-6 wetted & dual fused for solenoids, Contacts 7-11 dry Form-C, Contact 12 separate I/Owetting
I/OWetting Power Connector	Mate-N-Lok receptacle (AMP 350766-1)
Field Wiring Terminal Block	Barrier-type terminal blocks
Field Wiring	24 AWG min, 12 AWG max
I/O Scan Time	Configured frame rate of the controller determines I/Oscan rate for control
Sequence of Events (SOE)	Configurable for SOE of relay feedbacks
Diagnostic Fault Detection	Power-up self test, I/Opack health, checks commanded output vs feedback, loss of contact wetting voltage, open fuse detection, and incorrect terminal board check
Contact Output Line Monitoring	No
I/O Pack DC Control Power	24 / 28 V dc, 19.8 W max, includes power to drive output relay coils
I/O Pack DC Power Connector	Micro Mate-N-Lok receptacle (AMP 1445022-3)
I/O Pack Construction	Aluminum case
I/O Pack Health	Visual status LEDs, circuit health variables available to control logic
Termination Module Dimensions (includes cover and I/O pack) (H x W x D)	34.0 x 24.9 x 15.3 cm (13.4 x 9.4 x 6.0 in)
Safety Rated	Yes, compliant with IEC 61508
Hazardous Locations Capability	Class 1, Div 2 /Class 2, Zone 2 /ATEX. For ratings and further details, refer to the Mark VIeS Functional Safety System Equipment in Hazardous Locations (HazLoc) Instruction Guide (GEH-6861)
G3 Compliant	Yes
Ambient Operational Temperature	-40 to 70°C(-40 to 158°F)
Storage Temperature	-40 to 85°C(-40 to 185°F)
Mounting Method	DIN-rail mounted
I/O Pack Replacement Part Number	IS420YDOAS1B
Terminal Board Part Number	IS410TRLYS1B
Module Cover Replacement Part Number	151X1202YE08PP18BL

IS410TRLYS1B is a relay output and coil induction module in GE’s Mark VIeS series. The following is its description:

Functional characteristics

Relay output function: The module has a number of relay output channels, which can convert the weak current control signal issued by the control system into a strong current signal, so as to realize the control of external high voltage and high current equipment, such as the drive motor, contactor, solenoid valve, etc., to play the role of signal amplification and electrical isolation.

Coil induction function: it can monitor the working state of the relay coil in real time, including whether the coil is energized, the size of the current, the strength of the magnetic field, etc., through the electromagnetic change of the induction coil, it is converted into an electrical signal that can be identified by the control system, and fed back to the control system, so that the system can accurately judge and monitor the working state of the relay.

Working principle

When the control system inputs a control signal to the relay coil of IS410TRLYS1B module, a magnetic field is generated in the coil. The magnetic field magnetises the iron core of the relay and attracts the armature, thus driving the contact to close or disconnect, realizing the on-off control of the external load circuit.

At the same time, the induction part of the coil uses the principle of electromagnetic induction, through the change of the magnetic field around the induction coil, the corresponding induction electromotive force is generated, and the working state signal of the coil is fed back to the control system after processing.

Application field

Industrial automation control system: In all kinds of automatic production lines, such as automobile manufacturing, mechanical processing, food and beverage packaging industries, used to control the start and stop and operation sequence of motor, conveyor belt, cylinder and other equipment to ensure the efficient and stable operation of the production line.

Power system: In substations, power plants and other places, it can be used to control the on-off operation of electrical equipment such as circuit breakers and isolation switches, as well as trigger and control the protection devices in the power system to ensure the safe and reliable operation of the power system.

Energy management system: In new energy systems such as solar power generation and wind power generation, it is used to control the operation and switching of inverters, energy storage equipment, etc., to achieve effective conversion and storage of energy.

Performance parameter

Power supply voltage: Usually supports a variety of standard voltage levels, such as + 5V DC, +12V DC, +24V DC, etc., can be selected according to the specific application scenario and control system requirements.

Relay output capacity: Each relay output channel can withstand a certain voltage and current load, common parameters such as AC 250V/10A, DC 30V/10A, etc., can meet the load requirements of most industrial control occasions.

Coil induction sensitivity: With high coil induction sensitivity, weak magnetic field changes can be accurately detected, ensuring accurate monitoring of the working state of the relay coil.

Operating temperature range: Generally can work in a wide temperature range, such as -40 ℃ to + 85℃, to adapt to different industrial ambient temperature conditions.

Installation and maintenance

Installation method: The module usually adopts the standard DIN rail installation method, which is convenient and quick to install, saving installation space and time, and convenient for layout and installation in the control cabinet.

Maintenance points: Periodically check the appearance of the module to ensure that no dust or debris accumulates, which may affect heat dissipation and normal operation. Check the contact condition of relay contacts, such as oxidation, wear and other phenomena, should be cleaned or replaced in time; At the same time, check the connection line of the module to ensure that the connection is firm, no loose, virtual connection, etc.

 

• Other related models:

• IS420YDOAS1B

  IS410TRLYS1B

• IS410TRLYS1B

  IS410TRLYS1D

  IS410TRLYS1F

  IS410TRLYS2F

  IS410TVBAS2B

  IS420ESWAH1A

  IS420ESWAH2A

  IS420ESWAH3A

  IS420ESWAH4A

  IS420ESWAH5A

  IS420ESWBH1A

  IS420ESWBH2A

  IS420ESWBH3A

  IS420ESWBH4A

  IS420ESWBH5A

  IS420PPDAH1B

  IS420PSCAH1B

  IS420UCSCH1B

  IS420UCSCS2A

  IS420YAICS1B

  IS420YDIAS1B

  IS420YDOAS1B

  IS420YUAAS1A

  IS420YVIBS1B

  IS430SSUAH1A