IC697CPX928    Central processing unit   CPU module

IC697CPX928    Central processing unit   CPU module

Technical Specifications for IC697CPX928

About IC697CPX928

The GE Fanuc Series 90-70 module with catalog number IC697CPX928 is a Central Processing Unit (CPU) that is used mainly to execute user program downloaded to the CPU’s memory. This CPU module is a single slot chassis that features an 80486DX4 microprocessor with speed of 96 MHz and 0.4 µs per Boolean function execution. This module is equipped with an on-board memory of 6MB battery-backed up RAM and 256KB non-volatile user flash memory where CPU firmware is also stored.

The IC697CPX928 is capable of handling a maximum of 12K inputs and outputs of any combination, and up to 8K analog Input and Output. It supports 32-bit floating point data.

The IC697CPX928 is configured using the programming software. It has no jumper terminals or DIP switches for hardware parameter setting. Application software are Programmed by MS-DOS software products, or Windows based software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through an SNP port.

This controller has is equipped with Seven (7) status LEDs specifically, a lithium battery that is used to retain the contents of the Random Access Memory (RAM), and communication ports such as One (1) RS232 serial port, Two (2) RS485 Serial port and One (1) Factory Reset port.

The IC697CPX928 is compatible for use with a variety of option modules to enhance and provide additional capabilities to the CPU. These option modules include Ethernet Interface modules, Programmable Coprocessor, Alphanumeric Coprocessor, Bus Controller, Communication modules, I/O Link Interface, and the entire IC697 discrete and analog I/O modules family.

The nominal current required by the IC697CPX928 module is 3.1 Amps. The input voltage required is 5 Volts DC. With forced air-cooling rated at 70 CFM, the module can be operated at ambient temperatures between 32 and 140 degrees Fahrenheit.

Without forced air-cooling, the range of operating temperatures of the IC697CPX928 CPU module is reduced to between 32 and 122 degrees Fahrenheit. Depending on the types of power supply that are available, 120 Volts AC, 240 Volts AC, or 24 Volts DC-powered rack fan assemblies can be installed on the IC697CPX928 module. The CPU module comes with 3 serial ports, of which 2 ports support RS-485 communication and 1 port supports RS-232 communication. These serial ports can be used to interface with programming devices for CPU configuration. Additionally, optional Ethernet modules can also be installed in the PLC to enable the configuration of the IC697CPX928 module over Ethernet networks. The I/O supported by the IC697CPX928 module include a maximum of 8000 analog I/O and 12,000 I/O in any mix. The IC697CPX928 module requires 1 slot in GE Fanuc Series 90-70 PLC rack for installation. A total of 7 LEDs are provided on the front of module for status updates.

FAQ for IC697CPX928

What is the type of microprocessor used by the IC697CPX928?

The IC697CPX928 is installed with 96MHz 80486DX4 processor with typical scan rate of 0.4 µs per Boolean function.

What are the communication ports of IC697CPX928 CPU?

The IC697CPX928 has One (1) RS232 serial port, Two (2) RS485 Serial port and One (1) Factory Reset port.

What are the supported protocols by the IC697CPX928?

The IC697CPX928 supports SNP (Slave), Break-Free SNP (Slave), SNPX and RTU.

Technical Description of IC697CPX928

The IC697CPX928 module is a 32-bit CPU module. The IC697CPX928 CPU is compatible with the GE Fanuc Series 90-70 PLC systems.

 

 

 

Company’ s Name: Xiamen xiongba e-commerce Co., Ltd

Contact: Zoe

Phone Number/Wechat: +86-15359298206

Whatsapp : +86 15359298206

Q Q:2851759107

E-mail: 2851759107@qq.com

 

Main Products.

1、 ABB AC800M series modules, industrial robot parts DSQCseries, Bailey INFI 90, 800xA,

Advant OCS with Master Software, with MOD 300software Advant OCS, Freelance –

Process Industrial Distributed Control System, Symphony Melody, Satt OCS, Symphony DCI System Six,

Harmony/ INFI 90, Safety Systems

2、Schneider 140 series CPU modules

3、General electric (General Electric) series IC693 、IC695、 IC697、 IC698

Relay protection SR469 、 SR369 、 SR489 、SR750

IS200/IS215/IS220/IS420/DS200/DS215/VMIVME beginning with 7750 7807

4、Ticonex (Invensys) series 3721,3503,4351B,3625,3009

5、Bently (Bentley) 3500 series big card small card 1900 series power module

3500/15 3500/20 3500/22M 3500/42M 3500/25 3500/32 3500/53

6、Allen-Bradley (American AB) series products 1394 、 2711 、1756、1747 etc.

7、EMERSON /Westinghouse (Emerson Westinghouse) series products OVATION system、WDPF system、MAX0 system spare parts.

DELTAV Deltave VE3008/CE3008/SE3008/VE3007/VE3006 SE4006P2

8、Foxboro (Foxboro): I/A Series system、 FBM (Field Input/Output Module) sequence control、ladder logic control

Incident memo processing, digital-to-analog conversion, input/output signal processing, data communication and processing, etc. FCP270/FCP280/FBM201…FBM242

9、Woodword 9907-167、9907-164、9907-165、5464-414、5466-316、5501-467、5501-beginning 8444-beginning

10、Bosch Rexroth(Bosch Rexroth): Indramat,I/O module,PLC controller,drive module,etc.

11、Motorola (Moto): MVME 162, MVME 167, MVME5500, MVME6100 and other series.

 

 

 

VMIVME-4905 – VMIC – CONVERTER BOARD SYNCHRO RESOLVER-TO-DIGITAL
VMIC-VME7698-345 – VMIC – PC BOARD
VMIC2540 – VMIC – PC BOARD
VMIC-4132 – VMIC – PC BOARD
VMIVME-4132-010 – VMIC – OUTPUT MODULE ANALOG 32CHANNEL 12BIT DISCREET WIRE
VMIVME-7765 – VMIC – PROCESSOR BOARD DUAL PENTIUM III VMEBUS SBC
VMIVME-4140 – VMIC – OUTPUT MODULE ANALOG 32CH 12BIT
VMIC4514 – VMIC – PC BOARD
VMIVME-4116-070L – VMIC – OUTPUT BOARD ANALOG 8CHANNEL 16BIT BUFFERED
VMIVME-2540 – VMIC – COUNTER/CONTROLLER MODULE INTELLIGENT
VMIVME1110110 – VMIC – BOARD
VMIVME-1150 – VMIC – DIGITAL INPUT BOARD
VMIVME-2536 – VMIC – I/O MODULE DIGITAL 32CH OPTO-COUPLER
VMIVME-7452 – VMIC – HARD DRIVE MODULE W/ FLOPPY DRIVE
VMIVME-7750-339000 – VMIC – SINGLE SLOT PENTIUM III SBC 1.26GHZ
VMIVME-6015 – VMIC – PC BOARD MODULE VME
VMIC2536 – VMIC – PC BOARD
VMIVME-2528 – VMIC – I/O MODULE 128BIT
VMIVME-4514A – VMIC – I/O BOARD 16-CHANNEL SCANNING ANALOG
VMIC-1150 – VMIC – PC BOARD

IS215UCVEM06A

 

 

IS2020DRLYH1AA, RELAY BOARD,
IS2020JPDBG01, W O SOUR.SE.,
IS2020JPDFG01, DC POW. DIST,
IS2020RKPSG2A, POWER SUPPLY MARK VI WITH 335V,
IS210DSVOH1AA, CARD ASSEM. ,
IS210DTCIH1AA, CARD ASSEM. DTCI RAI,
IS210DTRTH1AA, CARD ASSEM. DTRT RAI.,
IS210DTTCH1AA,
IS210DTURH1AA, CARD ASSEM DTTC RAI I,
IS210WSVOH1A, WSVO HEATSINK ASSM,
IS215ACLEH1C, ACLE ASM ATOM CPU,
IS215UCCAM03A, CPCI MARKVI CONTROLLER, QNX6,
IS215VAMBH1A, ACOUSTIC MONITORING CARD ASSEM,
IS215VCMIH2B, VME COMM INTERFACE CARD,
IS215VCMIH2C, VME COMM INTERFACE CD,
IS215VPROH1B, VME PROTECTION ASSEMBLY,
IS215VPROH2B, SUBPART OF IS215VPROH2BC,
IS220PAICH2A, ANALOG IN OUT 200MA,
IS220PDIOH1A, DISCRETE IO,
IS220PPROH1A, IO CARD MKVIE,
IS220PSFDH1A, 335V POWER SUPPLY,
IS220PTCCH2A,  IO PACK,
IS220PTURH1A, I O PACK,
IS220UCSAH1A, STANDALONE PROCESSOR MODULE,
IS400JGPAG1A, TERMINAL BOARD FOR PCCAH1A,
IS415UCVGH1A, VME CONTROLLER CARD VMIC,
IS415UCVHH1A, CONTROLLER, VME, EMI,
IS200ACLEH1B,
IS200ACLEH1A, ACLE CARRIER CARD,
IS200AVIFH1A,
IS200BAIAH1B, PWM2 3 I O BOARD,
IS200BICHH1A, BRIDGE INTERFACE HIG,
IS200BICLH1A,
IS200BICLH1B, BRIDGE INTERFACE CARD,
IS200BICMH1A, IGBT GATE DRIVER,
IS200BICRH1A, BRIDGE INTERFACE ROB,
IS200BLIGH1A, BIC LAN INTERFACE GE,
IS200BPIBG1A,
IS200BPIHH1A, BICH TO FOSB INTERFA,
IS200BPPH2B, MK6 CARD,
IS200BPVCG1BR1,
IS200CPFXG1A, PHASE LEG FLASH PROT,
IS200CVMBG1A, CAPACITOR VOLT MONIT,
IS200DAMAG1B, IGBT AT INVERTER SNU,
IS200DAMBG1A,
IS200DAMCG1A, GATE DRIVE AMP, 250A,
IS200DAMDG1A, GATE DRIVER, 180 125 92A,
IS200DAMDG2A,
IS200DAMEG1A, GATE DRIVE CARD, 68A,
IS200DSCBH1A, DIN RAIL T.B.SERIAL,
IS200DSCBH1AAA,
IS200DSPCH1A, ACLE CARRIER CARD ,
IS200DSPXH2C,
IS200DTCIH1ABB,
IS200ECTBG1A, TERMINAL BD EX2100,
IS200EDCFG1A, BOARD EX2100 DC FEEDBACK,
IS200EGDMH, CARD EX2100 GND DETE,
IS200EGDMH1A,
IS200EGPAG1A, OBS_GATEPULSE APMLIFIER,
IS200EISBH1A, EXCITER IN SYNCH BUS,
IS200EMIOH1A, CARD EX2100 MAIN I O,
IS200EPCTG1A, CARD EX2100EPCT EXC,
IS200EPSMG1A, EX2100 POWER SUPPLY,
IS200ERGTH1A, EX 2100 REG GND DETEC,
IS200ERIOH1A, EXCITER MAIN_O,
IS200EROCHIA, EXCITER REGULATER OPTIONS CARD,
IS200ERRBG1A, EX2100R M2 C BACKPLA,
IS200ERRRH1A, EX2100R REDUNDANT RE,
IS200ERSCG2A, EX REG CONVERTER,
IS200ESELH1A, EX2100 EXCITER SELECTOR CARD,
IS200EXCSG1A, EX2100 CONDUCTION S,
IS200EXIBG1A, EXCITER BRIDGE INTER,
IS200FOSAG1A, FIBER OPTIC I O,
IS200FOSBH1A,
IS200GGXIG1A, EXPANDER BOARD,
IS200HFPAG1A, CARD HF AC SUPPLY,
IS200HFPAG2A, FAN XFRMR CARD,
IS200HFPRG1A, HIGH FREQUENCY PWR S,
IS200IGDMH1B,
IS200IGEHG1A, IGBT INTERFACE PASSI,
IS200IGPAG2A, GATE DRIVE POWER SUP,
IS200ISBAH1A, PC104_INSYNC,
IS200ISBBG1A, INSYNC BUS BYPASS,
IS200ISBBG2A,
IS200ISBDG1A, INSYNC DELAY,
IS200ISBEH1A, INSYNC BUS EXTENDER,
IS200ISBEH2A,
IS200IVFBG1A, BD, PWM 3 CURRETN FEEDBACK,
IS200JGNDG1A, GROUND TERMINATION CARD 12,
IS200JGNDG1AAA, GROUND TERMINATION CARD ,
IS200JPDLG1A,
IS200PICHG1A, PHASE INTERFACE,
IS200RAPAG1A, RACK POWER SUPPLY,
IS200RAPAG1B,
IS200RCSAG1A, 1800A RC SNUBBER,
IS200SCNVG1A, SCR DIODE BRIDGE CON,
IS200SSCAH1A, COMMUNCATION TERMIN,
IS200TBAIH1A,

 

FAQ:

1.Are your product brand-new and original?

Yes,100% brand-new and original products.

 

2.How long is the quality guarantee for your products?

All our products with 1 year warranty.

 

3.When will you delivery the goods?

With stock, we will arrange delivery in about 3 to 5 days; without stock, it will take relatively long time, but it won’t be too long, it mainly depends on order quantity.

 

4.What are your terms of payment?

Generally through TT, western union and PayPal.